Linds Handmade – Pocket Pal Paper Pattern
$9.99
This is a beginner friendly pattern, but you should be comfortable with inserting zippers, and cutting & sewing accurately which will make all the difference in the overall end look since the edges are left raw. If you’ve never sewn with cork, vinyl or leather before, please read the “Tips & Tidbits” section carefully where we share our tips for sewing with these materials.
Specs: Finished wallet is approximately 5½” wide by 4” tall, has 3 recessed card slots, (with a closure tab to keep them secure), and a zippered main compartment.
To get started, you will need the following supplies:
• 11”x 8” piece of leather, cork, or vinyl
• 11”x 8” piece liner fabric
• (1) set spring snaps with setting tool
• 21” of 2 ½” wide ribbon (or very lightweight fabric)
• (1) 4” zipper (if using zipper by the yard, cut it 5”) #5 is preferred
• ¼” Double sided tape
• Lighter/Fray Check ™
• Spray adhesive
• Leather glue or Beacon Fabri-Tac ™
• Rotary cutter (or SHARP X-acto knife/box cutter)
• Quilting ruler
• Wonder clips
• Removable marking pen
• Sharp scissors
• Rotary leather punch or 5/32” hole punch
• Leather edge paint & applicator (*optional)
5 in stock
Related Products
Linds Handmade – Marilyn Paper Pattern
This listing is for a PRINTED PAPER pattern only! If you want to make your own Marilyn wallet, you’re in the right place. You are NOT purchasing a completed wallet. By purchasing this pattern Linds Handmade LLC grants the purchaser … Read More
Andrie Designs – Layla Essentials Purse Paper Pattern
An easy to follow sewing pattern to create a Layla Essentials Purse – a darling little purse, just big enough to hold all your essentials.
Featuring 11 card slot pockets, a clear ID pocket, a notes pocket, and a zipped coin pocket, she packs a LOT in for her petite little size! She also has two additional storage pockets which are perfect for business cards, receipts, etc!
She has a simple flap with a magnetic snap closure and an optional wrist strap attached at the top.
The finished size of the Layla Essentials Purse is as follows:
- Width – 3 3/4” (9.5cm)
- Height – 5 1/4” (13.5cm)
- Depth – 1″ (2.5cm)
Materials Required:
- Fabric for the Main – Outer (e.g. quilting cotton) – 11” x 8” (28cm x 20cm)
- Fabric for the Flap – Outer/Lining, Wrist Strap, Strap Connector (e.g. quilting cotton) – 1/4yd (23cm)
- Fabric for the Card Slots (ALL), Main – Lining, Notes Pocket – Lining, Zipper Pocket (e.g. quilting cotton) – 3/4yd (69cm)
- Fabric for the Notes Pocket – Outer, Left/Right Card Slots – Lining, Left/Right/Centre Card Slots – Side Panels, Centre Card Slots – Joining Panel, ID Pocket – Trim (e.g. quilting cotton) – 1/4yd (23cm)
- Vinyl for the ID Pocket (e.g. 12 gauge clear vinyl) – 4” x 5” (10cm x 13cm)
- Light-Medium Weight Fusible Interfacing (e.g. Pellon Shapeflex SF101, Legacy Shapeflex L-SF101) (NOTE: based on a 40”/100cm width) – 3/4yd (69cm)
- Fusible Fleece (e.g. Pellon Thermolam 971F, Vilene H640) – 12” x 13” (30cm x 33cm)
- Firm Fusible Stabiliser (e.g. Pellon’s Peltex #71F, Legacy #71F) – 3” x 1 1/2” (8cm x 4cm)
- 1 Slim Magnetic Snap; Optional – 1 Swivel Hook, 1 D-Ring – 3/4” (20mm)
- 1 Coordinating Dress Zipper – 4” (10cm)
- Coordinating thread, scissors and general sewing supplies including fabric glue/tape.
Mrs H – The Gentleman’s Wallet – Paper Pattern
The Gentleman’s Wallet features 4 card slots, 3 on the right, 1 on the left. It also has a clear vinyl ID pocket. Behind each set of card slots is a hidden slip pocket. And behind the card slots there’s a full width note holder and behind that another! That’s 2 full width pockets for all of your junk important things.
This sewing pattern is designed for fabrics! Quilting cottons, batiks, possibly a touch of canvas. This wallet was initially designed to be sewn in fabric, but many customers used their creativity and tried vegan leather, vinyl and even cork!
MATERIALS NEEDED:
Fabric:
2 FQ or 1/2yd (0.45m) for the lining & outer – Cottons are preferable. Avoid linens and very thick fabrics for the interior pockets.
1 x FQ Firm interfacing – Vilene H250 or Pellon 809
9 1/4″ x 3 3/4″ (23.5cm x 9.25cm) Extra firm interfacing – Decovil 1 or Peltex
4″ x 3″ (10cm x 7.75cm) – Clear vinyl
Tools:
Double sided basting tape
Walking foot
Hera marker
Iron & board
2 different colour washable pens
RECOMMENDED FABRICS: Please review the back of the pattern cover for recommended fabrics. Shop our selection of Cork Fabric or Faux Leather, for a designer finish. We also offer quality Interfacing and Stabilizers
Sew Many Creations- Diva Frame Wallet – Paper Pattern
The Diva is very easy to make. You’ll want one to match every bag you have! And just wait until your friends see it – they’ll want one too.
Inside each Diva Frame wallet is a zippered coin pocket, 2 open pockets for cash & receipts and 6 individual card pockets. The metal frame closure is the perfect finishing touch – With just 8 small screws, adding it is a snap!
Sewgnar – Key Fob Wallet – Paper Pattern
A minimal slimline wallet featuring a detachable key fob strap, 2 card slots, folded cash area, clear ID window, and zippered coin pouch, all secured by a magnetic snap. Once completed, you will have your very own unique Key Fob Wallet, great for gifting or small business personal selling.
MATERIALS NEEDED:
Fat quarter of self healing textile (cork, vinyl, leather, etc.)
Vinyl (ID Window)
5” Zipper or longer (will cut to size)
Magnetic Snap Set
1/2” Lobster Clasp & D-Ring
(1) 8mm Double Cap Rivet
Clips (Wonder Clips, alligator clips, etc.)
Coordinating Thread
Optional:
Scrap of Interfacing
RFID Blocking Material
Chalk or Fabric Pen
Quick Dry Fabric Glue
RECOMMENDED FABRICS: Please review the back of the pattern cover for recommended fabrics. Shop our selection of Cork Fabric or Faux Leather, for a designer finish. We also offer quality Interfacing and Stabilizers
Linds Handmade – Purse Pal Paper Pattern
With this purchase, you will be mailed a paper version of this pattern with full pattern pieces, detailed pictures, and step by step instructions. It will come in a resealable plastic bag with a vent hole and convenient hanging hole. This pattern is designed to be used with any self-healing material such as cork, leather, vinyl etc as the edges are left raw (with the option of using edge paint to finish off the edges.) Do NOT try making with cotton fabric! This is a beginner friendly pattern, but you should be comfortable with inserting zippers, and cutting & sewing accurately which will make all the difference in the overall end look since the edges are left raw. If you’ve never sewn with cork, vinyl or leather before, please read the “Tips & Tidbits” section carefully where we share our tips for sewing with these materials.
Specs: Finished wallet is approximately 4” wide by 7” tall, has 6 recessed card slots, (with a closure tab to keep them secure), a long slip pocket, and a lined zippered main compartment.
To get started, you will need the following supplies:
• 2 sq ft of leather or ⅓ yd cork or vinyl
• 8”w x 7”h piece liner fabric
• ⅛ yd of lightweight fabric for card slots (2 ½”w x 40”h)
• (1) set of 12.5 mm spring snaps with setting tool (or Kam snaps)
• (1) 5” purse zipper (if using zipper by the yard, cut it 6”)
• ¼” Double sided tape
• Lighter or FrayCheck ™
• Spray adhesive
• Leather glue or Beacon Fabri-Tac™
• Rotary cutter (or SHARP X-Acto knife/box cutter)
• Quilting ruler
• Wonder clips
• Removable marking pen
• Sharp scissors
• Rotary leather punch or 5/32” hole punch
• Leather edge paint & applicator (*optional)
• 800 grit sandpaper (*optional)
• Craft glue stick (*optional)
g (optional)
Linds Handmade – Ashley Clutch Wallet Paper Pattern
This is a confident beginner pattern that does require the sewer to have a general familiarity with bag making and sewing terms. Specs: it is 7 1/2″ x 6″h x 1″d. It uses a 7 1/2″ bar clasp closure, has 2 … Read More
Sewgnar – TriFold Wallet – Paper Pattern
This sewing pattern walks you through creating you own bifold wallet with 6 card slots that fit multiple cards, three under card “hidden pocket” areas, and one cash slot.
NOTE: For use with self healing textiles only – cork, vinyl, leather, etc. This pattern WILL NOT work for fabric. The narwhal cutout is not included.
Once completed, you will have your very own unique TriFold Wallet, great for gifting or small business personal selling.
Materials Needed:
- 1 Fat Quarter of Cork, Vinyl, or Leather (or any other self healing material)
- Coordinating Thread
- Clips
Skill Level: Confident Beginner and up