Blue Calla Coneflower Crossbody Bag – Paper Pattern

The Coneflower cross body bag is a great, medium-sized unisex bag. It is an easier project, perfect for confident beginners. 

It has an exterior zippered pocket on one side and a main flap closure with two magnetic snaps, concealing a hidden pocket perfect for a regular iPad.  You can carry the bag with the flap towards your body for added security or carry it with the flap pointing outwards.

For the bag’s interior, there are two slip pockets and one zippered pocket.

The bag can be made in a variety of fabric types: fabric, cork, vinyl or waxed canvas. You can interface your bag with fusible fleece for a softer structure or with foam for a more structured look, according to your personal preference.

SUPPLIES:

Exterior fabric: 

1/2 yard Exterior fabric 1
1/4 yard or less Exterior fabric 2/Vinyl/Cork

Lining fabric:

1 yard Lining fabric

Interfacing:

4 yards Fusible woven interfacing (20” wide)
8” W x 2.75” H Firm sew-in stabilizer (Pellon Peltex 70/Stiff Stuff interfacing)
1/2 yard Fusible fleece (45” wide)
***If you wish, you can substitute the fleece with foam for the body (not including the flap which requires fleece). You will need:
1 yard Foam interfacing (20” wide)

Notions and Supplies:

(1) 1.5” Rectangle slide
(2) 1.5” Rectangle ring
(2) 18mm magnetic snap
(1) 9” zipper (#3 dress zipper) for exterior pocket
(1) 7” zipper (#3 dress zipper) for interior pocket

Measurements:  9” W x 11” H x 2.75” D (23 cm x 28 cm x 7 cm) 

SEWING EXPERIENCE: This project is suitable for a confident beginner.

PLEASE NOTE: This pattern is in ENGLISH

$11.99 Add to cart
Blue Calla Honeysuckle Hobo – Paper Pattern

The Honeysuckle Hobo bag is a large bag with 2 exterior zippered pockets, one sewn into the extra deep gusset and another on the front of the bag.

On the inside, there are 2 slip pockets and another zippered pocket but you can add additional pockets if you prefer as the bag is quite large. This bag would make an excellent carry-on travel bag.

It comes with instructions for a shorter shoulder strap however you can easily change this to an adjustable strap for cross body carrying.

Supplies:

Exterior fabric: 

1 1/4 yards Exterior fabric 1 (44” W)
1/3 yard Exterior fabric 2/vinyl/cork (58” W)
1 Fat quarter Exterior Focal fabric

Lining fabric:

1 3/4 yards Lining fabric (44” W)

Interfacing:

5 yards Fusible woven interfacing (20” wide)
3/4 yard Fusible fleece (45” wide)
9” W x 6 3/4” H Firm Sew-in Stabilizer (Pellon Peltex 70/Stiff Stuff interfacing)

Notions and Supplies:

(2) 1.5” O-rings
(2) 1.5” Swivels 
(1) 20” double pull or single pull zipper for main closure (MUST be #4.5 or #5)
(1) 9” zipper for exterior pocket (MUST be #4.5 or #5)
(1) 7” zipper for exterior pocket (can be a #3 but you may want to match it to first two exterior zippers)

MEASUREMENTS: 15.5” W x 8” H x 6.75” D (39.37 cm x 20.3 cm x 17.5 cm)

SEWING EXPERIENCE: This project is suitable for an intermediate sewist.

$9.99 Add to cart
By Annie Daytripper II – Paper Pattern

Simple and secure, this handy padded case is perfect for carrying your iPad, tablet or other electronic gear.  An easy-to-install zipper at the top affords easy access while still providing protection for your valuable items. A padded zippered pocket on … Read More

$9.95 Add to cart
By Annie Night and Day – Paper Pattern

This versatile set of bags makes it easy to quickly change your look, night or day! The Purse has one slip and two zippered compartments to separate and organize all your essentials. Carry it over the shoulder or crossbody using … Read More

$9.95 Add to cart
By Annie On the Go – Paper Pattern

Small but mighty, this stylish 6″W x 8″H x 1½”D bag with a secure zipper closure has plenty of pockets to keep you organized. A zippered pocket on the front and slip pocket on back as well as seven inside … Read More

$9.95 Add to cart
By Annie Sanpshot Foldover Bags- Paper Pattern

These versatile foldover bags in two sizes have zippered tops that fold over and close with magnetic snaps. Need more room? Just open the flap and use the bag with the flap up! Because there is no quilting or bindings, … Read More

$9.95 Add to cart
By Annie Switchback – Paper Pattern

This sturdy and versatile satchel is just the right size for running around town or taking on a trip. Adjustable straps make it easy to carry the bag in a variety of ways: over the shoulder, cross body, or as … Read More

$9.95 Add to cart
Adi Crossbody Bag Pattern – PDF

The is a versatile pattern with exchangeable accent piece.  You can make as many accent pieces as you like! Exterior zipper pocket with overlay Interior zipper pocket Recessed Zipper Turn bag through zipper opening Finished Size: 10”W x 11″H x … Read More

$10.00 Add to cart
Knot and Thread Design – Athena Crossbody – Paper Pattern

Enjoy this handy little Crossbody made from fat quarters and a bit of yardage. Wear it as a crossbody or a fanny pack. Use it for travel, or everyday to carry your most necessary essentials. Bag measures: 71/4″H x 51/4″W x 21/4″D

  • Printed Paper Pattern
  • Finished Size: 7-1/4in x 5-1/4in x 2-1/4in
  • Final Product: Bags / Purses / Totes
  • Technique Used: Standard Machine Sewing
  • Skill Level: Confident Beginenr
$12.00 Add to cart
Linds Handmade – Christy Crossbody Paper Pattern

With this purchase, you will receive a paper copy of this pattern sent to you in the mail with detailed pictures and step by step instructions on how to make your own midsized purse.  It includes full pattern pieces and will come in a resealable plastic bag with a vent hole and convenient hanging hole. It is recommended for an advanced beginner who is comfortable sewing zippers.

This bag measures roughly 11″ wide by 8″ tall and 2″ deep and features 2 top grab handles, an adjustable crossbody strap, 1 interior slip pocket and 2 exterior slip pockets.

To get started, you will need the following supplies:

  • ½ yard main fabric
  • ½ yard lining fabric
  • ¼ yard accent fabric
  • ½ yard midweight interfacing*
  • 2½ yards 1½” webbing
  • (1) 12” #5 zipper by the yard
  • (1) 8” #5 zipper by the yard
  • (2) #5 zipper pulls
  • (2) 1” D rings
  • (1) 1½” strap adjuster
  • (2) 1½” swivel clasps
  • (9) 6mm or 8 mm double cap rivets and setting tool (*optional but highly recommended)
  • 5/32” leather hole punch or rotary punch (for rivets)
  • ⅛”-¼” Double-sided tape and/or craft glue stick
  • Wonder clips or pins
  • Quilting ruler
  • Rotary cutter
  • Removable marking pen
$11.99 Add to cart
Linds Handmade – H2O 2GO Sling Paper Pattern

This is an intermediate pattern, in that it uses advanced bag making techniques that require the sewer to have a general familiarity with bag making. It requires accurate cutting/sewing and installing a curved zipper which can be challenging for new sewers.

Specs: roughly 11″ tall at its tallest (along the sides) with an oval base that is 6″ wide by 4 inches deep. The interior compartment is left wide open so as to accommodate all different sized water bottles, (a 32oz Yeti was confirmed to fit inside.) The front pocket is 8″ tall and has 2 inner slip pockets (both large enough to fit an iPhone 8+, cash, passport or face mask) and 4 card slots that can easily be doubled up for more storage. We’ve even included a bonus option in the pattern showing you how to make it without the card slots if you have no need for those, substituting a slip pocket and pen pocket instead, AND another option eliminating that front pocket entirely if sewing for a child.

Materials and supplies needed:
• Fat quarter main fabric (more if using for body strap)
• ⅓ yard waterproof canvas (WPC)
• ¼ yard accent fabric
• ¼ yard of 17” decovil light or Peltex F71
• ½ yard of 45” woven interfacing (*fabric dependent)
• 16” or longer #5 zipper (for zipper by the yard, cut it exactly 14”)
• (2) 1” D rings, O rings, or triangle rings (or smaller)
• (2) 1½” swivel clasps
• (1) 1½” strap adjuster
• 57” of 1½” webbing for strap
• Rotary cutter
• Quilting ruler
• Wonder clips
• (6) small rivets (*optional)
• Pinking shears (*optional)
• ¼” Double sided tape (*optional)

$11.99 Add to cart
Mrs H – The Button Lock Bag – Paper Pattern

This cute Button Lock Bag is a fun sew for advanced beginners/intermediate level bagmakers. The Button Lock Bag uses both darts and a narrow gusset to achieve a style that sits against your body comfortably, yet can carry a surprising amount! Inside you’ll find a zip pocket and a full width slip pocket.

MATERIALS NEEDED:

Fabric:

⅝ yd (0.5m) Exterior – Directional fabric may need more
⅝ yd (0.5m) Contrast – Directional fabric may need more
⅞ yd (0.8m) Lining
⅞ yd (0.75m) Foam stabiliser
1 ⅝ yd (1.5m) Medium weight interfacing
2″ x 2″ & 2″ x 1″ (5cm x 5cm & 5cm x 2.5cm) Scraps of Ultra-firm stabiliser (Decovil 1, Peltex, S520)

Hardware & Notions:

1 x Large “Button” Lock “Button” Lock
1 x 8″ (20cm) #3 Zipper – if using continuous zipper, cut to 10″ (25.5cm) long
2 x 1 ½” (3.8cm) ‘O’ Rings
1 x 1″ (25mm) Strap Slider
4 x (Optional) Medium Rivets
Double sided basting tape
Zip foot & Walking foot
Wonder clips
Fray check
Pinking shears
Strong glue to secure the lock

RECOMMENDED FABRICS: Please review the back of the pattern cover for recommended fabrics. Shop our selection of Cork Fabric or Faux Leather, for a designer finish. We also offer quality Interfacing and Stabilizers

$14.50 Add to cart
Mrs H – The Convertible Bag – Paper Pattern

The compact bag size of The Convertible Bag is perfect for errands or a day trip where you don’t want to haul around a giant bag.

Need your hands free? Use The Convertible Bag as a backpack by unclipping the strap from its top rings, threading the strap through the back ‘tunnel’ and re-clipping it to the bottom D-rings. Concerned about the safety of a backpack or want easy access to your bag? You can quickly switch the strap back to its crossbody style.

The Convertible Bag has multiple pockets, with internal zip and slip pockets, as well as a zip pocket on the back and a slip pocket on the front.

MATERIALS NEEDED:

1 1/8yd (1m) Outer fabric
1 1/8yd (1m) Lining fabric
1 x FQ Contrasting outer fabric for front pocket
5/8 yd (0.5m) Heavy stabiliser
1 5/8yd (1.5m) Medium weight interfacing
1 x 1 1/2″ (38mm) Thumb catch
1 x 1″ (25mm) Triglide buckle
2 x 1″ (25mm) Swivel lobster clips
4 x 3/4″ (20mm) D-rings
2 x 6″ (15cm) zips (can be cut down to size)

I’ve found a mistake!

This pattern does have some known errors.

Incorrect cutting information on some paper patterns: Please follow cutting out guide on first page of booklet. The errors are as follows: 1 – Pattern Piece D Flap: pattern piece should read “Cut 1 outer, cut 1 lining, cut 1 fusible fleece, cut 2 medium weight interfacing”; 2 – Pattern Piece G Back strap tunnel: pattern piece should read “Cut 1 outer or contrast, cut 1 medium weight interfacing”; 3 – Pattern Piece I Zip and slip pockets: pattern piece should read “Cut 1 outer, cut 2 lining, cut 3 medium weight interfacing”.
Paper Piece B Lining measurements: Some of the paper patterns have the measurements reversed on the cutting out page for Paper Piece B Lining. The correct measurements are 13″ x 12″ (33cm x 30cm). The paper pattern piece, label, and PDF patterns are all correct.
Material requirements: You may need 1 5/8yds (1.5m) of medium weight interfacing for this bag.

RECOMMENDED FABRICS: Please review the back of the pattern cover for recommended fabrics. Shop our selection of Cork Fabric or Faux Leather, for a designer finish. We also offer quality Interfacing and Stabilizers

$14.50 Add to cart
Mrs H – The Crossbody Bag – Paper Pattern

Originally designed for The Bag Retreat, the Crossbody Bag sewing pattern is a small shoulder bag with just enough storage for your essentials – purse, phone, keys, and sunglasses. As well as the central pocket, the bag has a shaped slip pocket and a hidden back pocket too, perfect for hiding away your phone or wallet.

The front flap of The Crossbody Bag is great for customising. Although the bag sewing pattern guides you through how to sew a quilt as you go French Braid, you could instead embroider or applique the flap, use another patchwork technique, or keep it simple with a feature fabric. Style The Crossbody Bag your way!

Try to choose fabrics which are not too thick. Fabrics such as upholstery fabrics and faux leather will be dependent on the strength of your sewing machine. At its thickest, you’ll be sewing through 8 layers of outer.

Fabric:

Scraps of co-ordinating fabric, at least 3 different patterns, you will need to cut (10) 2” x 8” (5cm x 20cm) and (1) 2” x 2” square
5/8 yd (0.5m) Outer
3/4 yd (0.6m) Lining (directional will need more)
1 1/8 yd (1m) Medium weight interfacing (40″ or 90cm wide)
1 x FQ Fusible fleece
9” x 10” (23cm x 25.5cm) Non fusible batting/thin foam stabiliser

Hardware:

(1) x 6″ (15cm) #3 zip for the zipped pocket or use longer and cut to size
(1) x 3/4″ (18mm) Slim magnetic snap
(2) x 1/2″ (1.2cm) Strap clip with D-Ring
(1) x 1/2″ (1.2cm) Triglide buckle
(4) x 9mm x 8mm Double cap rivets (Optional)

RECOMMENDED FABRICS: Please review the back of the pattern cover for recommended fabrics. Shop our selection of Cork Fabric or Faux Leather, for a designer finish. We also offer quality Interfacing and Stabilizers

$14.50 Add to cart
Mrs H – The Sophisticated Sling – Paper Pattern

The Sophisticated Sling is quick, light on hardware, low on expensive supplies and exceptionally stylish. This beginner bag pattern includes a simple zip pocket on the inside and is secured with an oval flip lock on the outside. Make one … Read More

$14.50 Add to cart
Noodlehead Compass Bag – Paper Pattern

Sling this casual bag over your shoulder and go in a new direction! Find the way to your next adventure. This casual crossbody bag has two types of easy access exterior pockets, plenty of roomy space inside, fun hardware, and two sizes to sew! … Read More

$12.00 Add to cart
Noodlehead Traverse Bag – Paper Pattern

You’ll love taking this versatile and compact crossbody bag on all of your travels. The zippered top main compartment and handy back zippered pocket keep all your essentials secure while the front pocket(s) provides easy access to the items you … Read More

$12.00 Add to cart
Sallie Tomato Carrie – Paper Pattern

The design details of the Carrie bag, offer a luxury look. This glamorous baguette bag can be carried over the shoulder, or crossbody by attaching a chain strap. The name and design of this pattern was inspired by the fear-less fashion sense of the fabulous, Carrie Bradshaw. Be prepared for everyone to swoon over this vintage design!

FINISHED SIZE: 10-3/4” wide, 6” high, and 2-1/4” deep

FEATURES: flap closure with bag lock, interior zipper pocket, adjustable shoulder strap, optional hardware embellishments

 

$9.99 Add to cart
Sallie Tomato Daisy – Paper Pattern

Daisy is a trendy round bag that can be casual or glamorous depending on the fabric and hardware choices! The name of this pattern was inspired by the character Daisy Buchanan from the Great Gatsby. This bag features piping, a recessed zipper closure, adjustable crossbody strap, and optional metal handles. The pattern features a unique, stress-free method to attach lining, with no binding!

FINISHED SIZE: 8″ wide, 8″ high, and 3″ deep.

FEATURES: piped edges, recessed zipper top closure, contrasting adjustable strap, deep gusset, optional metal handles.

RECOMMENDED FABRICS: Please review the back of the pattern cover for recommended fabrics. Shop our selection of Cork Fabric or Faux Leather, for a designer finish. We also offer quality Interfacing and Stabilizers

ZIPPER REQUIRED: This pattern requires a 9″ single slide zipper. Shop our selection of Zippers by the Yard, to achieve the professional appearance of metal, but with ease of sewing with nylon!

$9.99 Add to cart