Andrie Designs – Layla Essentials Purse Paper Pattern
An easy to follow sewing pattern to create a Layla Essentials Purse – a darling little purse, just big enough to hold all your essentials.
Featuring 11 card slot pockets, a clear ID pocket, a notes pocket, and a zipped coin pocket, she packs a LOT in for her petite little size! She also has two additional storage pockets which are perfect for business cards, receipts, etc!
She has a simple flap with a magnetic snap closure and an optional wrist strap attached at the top.
The finished size of the Layla Essentials Purse is as follows:
- Width – 3 3/4” (9.5cm)
- Height – 5 1/4” (13.5cm)
- Depth – 1″ (2.5cm)
Materials Required:
- Fabric for the Main – Outer (e.g. quilting cotton) – 11” x 8” (28cm x 20cm)
- Fabric for the Flap – Outer/Lining, Wrist Strap, Strap Connector (e.g. quilting cotton) – 1/4yd (23cm)
- Fabric for the Card Slots (ALL), Main – Lining, Notes Pocket – Lining, Zipper Pocket (e.g. quilting cotton) – 3/4yd (69cm)
- Fabric for the Notes Pocket – Outer, Left/Right Card Slots – Lining, Left/Right/Centre Card Slots – Side Panels, Centre Card Slots – Joining Panel, ID Pocket – Trim (e.g. quilting cotton) – 1/4yd (23cm)
- Vinyl for the ID Pocket (e.g. 12 gauge clear vinyl) – 4” x 5” (10cm x 13cm)
- Light-Medium Weight Fusible Interfacing (e.g. Pellon Shapeflex SF101, Legacy Shapeflex L-SF101) (NOTE: based on a 40”/100cm width) – 3/4yd (69cm)
- Fusible Fleece (e.g. Pellon Thermolam 971F, Vilene H640) – 12” x 13” (30cm x 33cm)
- Firm Fusible Stabiliser (e.g. Pellon’s Peltex #71F, Legacy #71F) – 3” x 1 1/2” (8cm x 4cm)
- 1 Slim Magnetic Snap; Optional – 1 Swivel Hook, 1 D-Ring – 3/4” (20mm)
- 1 Coordinating Dress Zipper – 4” (10cm)
- Coordinating thread, scissors and general sewing supplies including fabric glue/tape.
By Annie Necessories – Paper Pattern
Quick and easy patterns for a mini bag, a double eyeglass/cell phone case, and a pocket wallet. Pretty and practical, these accessories are quick and easy to make using your favorite fabrics. Make them to match your purse or your mood — … Read More
By Annie Sew Simple Wallet – Paper Pattern
Minimal supplies and just a little bit of time are all you need to make this simple wallet in three versions: one pocket, two pocket, and three pocket. Use them to organize and carry cash, credit cards, loyalty cards, coupons, … Read More
Emmaline – The Necessary Clutch Wallet – Paper Pattern
The Necessary Clutch Wallet isn’t your ordinary wallet. Carry your cell phone/mobile, cheques, cash, cards, coins and still have room for your favorite lipstick or even personal items. With its closed ends, everything is safe and secure and there is never any worry … Read More
Emmaline -The Road Trip Wallet – Paper Pattern
The Road Trip Wallet, in 2 sizes, features 2 full-length zipper pockets that form the front and back “covers” of this book-like wallet. These covers flip open to reveal a center zipper pouch with an ID Window Pocket, and 2 sections of credit card slot pockets. The small size holds 10 cards, and the large, 16. Use my unique method to create the straightest credit card slots! Draw your card slot lines quickly and precisely. Choose from 3 versions of closures to finish off your wallet. Note: Version C works with the large size only because the ID Pocket interferes with the snap in the small size.
This is an “Intermediate to Advanced” sewing pattern with a lot of cutting involved. Use the “speed cutting”method to make things go along quicker!
Small Size: Width– 6 1/2” (16.5 cm) Height– 4.5” (11.5 cm) Depth– 3/4” (19 mm)
Large Size: Width– 8” (20 cm) Height– 4.5” (11.5 cm) Depth– 3/4” (19 mm)
Linds Handmade – Andrew Trifold Wallet Paper Pattern
With this purchase, you will receive a paper copy of this pattern sent to you in the mail with detailed pictures and step by step instructions on how to make your own wallet. It includes full pattern pieces and will come … Read More
Linds Handmade – Ashley Clutch Wallet Paper Pattern
This is a confident beginner pattern that does require the sewer to have a general familiarity with bag making and sewing terms. Specs: it is 7 1/2″ x 6″h x 1″d. It uses a 7 1/2″ bar clasp closure, has 2 … Read More
Linds Handmade – Demi Wallet Paper Pattern
You should be comfortable inserting zippers and sewing accurate seam allowances as this project is very small, and attention to detail is important for the final product. We’ve included dozens of pictures to accompany each step, as well as cutting … Read More
Linds Handmade – Marilyn Paper Pattern
This listing is for a PRINTED PAPER pattern only! If you want to make your own Marilyn wallet, you’re in the right place. You are NOT purchasing a completed wallet. By purchasing this pattern Linds Handmade LLC grants the purchaser … Read More
Linds Handmade – Pocket Pal Paper Pattern
This is a beginner friendly pattern, but you should be comfortable with inserting zippers, and cutting & sewing accurately which will make all the difference in the overall end look since the edges are left raw. If you’ve never sewn with cork, vinyl or leather before, please read the “Tips & Tidbits” section carefully where we share our tips for sewing with these materials.
Specs: Finished wallet is approximately 5½” wide by 4” tall, has 3 recessed card slots, (with a closure tab to keep them secure), and a zippered main compartment.
To get started, you will need the following supplies:
• 11”x 8” piece of leather, cork, or vinyl
• 11”x 8” piece liner fabric
• (1) set spring snaps with setting tool
• 21” of 2 ½” wide ribbon (or very lightweight fabric)
• (1) 4” zipper (if using zipper by the yard, cut it 5”) #5 is preferred
• ¼” Double sided tape
• Lighter/Fray Check ™
• Spray adhesive
• Leather glue or Beacon Fabri-Tac ™
• Rotary cutter (or SHARP X-acto knife/box cutter)
• Quilting ruler
• Wonder clips
• Removable marking pen
• Sharp scissors
• Rotary leather punch or 5/32” hole punch
• Leather edge paint & applicator (*optional)
Linds Handmade – Purse Pal Paper Pattern
With this purchase, you will be mailed a paper version of this pattern with full pattern pieces, detailed pictures, and step by step instructions. It will come in a resealable plastic bag with a vent hole and convenient hanging hole. This pattern is designed to be used with any self-healing material such as cork, leather, vinyl etc as the edges are left raw (with the option of using edge paint to finish off the edges.) Do NOT try making with cotton fabric! This is a beginner friendly pattern, but you should be comfortable with inserting zippers, and cutting & sewing accurately which will make all the difference in the overall end look since the edges are left raw. If you’ve never sewn with cork, vinyl or leather before, please read the “Tips & Tidbits” section carefully where we share our tips for sewing with these materials.
Specs: Finished wallet is approximately 4” wide by 7” tall, has 6 recessed card slots, (with a closure tab to keep them secure), a long slip pocket, and a lined zippered main compartment.
To get started, you will need the following supplies:
• 2 sq ft of leather or ⅓ yd cork or vinyl
• 8”w x 7”h piece liner fabric
• ⅛ yd of lightweight fabric for card slots (2 ½”w x 40”h)
• (1) set of 12.5 mm spring snaps with setting tool (or Kam snaps)
• (1) 5” purse zipper (if using zipper by the yard, cut it 6”)
• ¼” Double sided tape
• Lighter or FrayCheck ™
• Spray adhesive
• Leather glue or Beacon Fabri-Tac™
• Rotary cutter (or SHARP X-Acto knife/box cutter)
• Quilting ruler
• Wonder clips
• Removable marking pen
• Sharp scissors
• Rotary leather punch or 5/32” hole punch
• Leather edge paint & applicator (*optional)
• 800 grit sandpaper (*optional)
• Craft glue stick (*optional)
g (optional)
Mrs H – The Gentleman’s Wallet – Paper Pattern
The Gentleman’s Wallet features 4 card slots, 3 on the right, 1 on the left. It also has a clear vinyl ID pocket. Behind each set of card slots is a hidden slip pocket. And behind the card slots there’s a full width note holder and behind that another! That’s 2 full width pockets for all of your junk important things.
This sewing pattern is designed for fabrics! Quilting cottons, batiks, possibly a touch of canvas. This wallet was initially designed to be sewn in fabric, but many customers used their creativity and tried vegan leather, vinyl and even cork!
MATERIALS NEEDED:
Fabric:
2 FQ or 1/2yd (0.45m) for the lining & outer – Cottons are preferable. Avoid linens and very thick fabrics for the interior pockets.
1 x FQ Firm interfacing – Vilene H250 or Pellon 809
9 1/4″ x 3 3/4″ (23.5cm x 9.25cm) Extra firm interfacing – Decovil 1 or Peltex
4″ x 3″ (10cm x 7.75cm) – Clear vinyl
Tools:
Double sided basting tape
Walking foot
Hera marker
Iron & board
2 different colour washable pens
RECOMMENDED FABRICS: Please review the back of the pattern cover for recommended fabrics. Shop our selection of Cork Fabric or Faux Leather, for a designer finish. We also offer quality Interfacing and Stabilizers
Sallie Tomato Lucky $2 Wallet – Paper Pattern
The Lucky $2 Wallet is a simple, beginner level wallet that has been designed for sewing with cork fabric, faux leather, or kraft-tex. It only requires a small amount of material. This is a wonderful pattern for anyone who is sewing with cork, faux leather, or kraft-tex for the first time, or for using up scraps!
From start to finish, this sewing pattern takes approximately 60 minutes complete.
FEATURES: two card slots, one additional pocket, money pocket, and a zipper pocket
FINISHED SIZE: folded it is roughly 4″ wide and 4″ high
RECOMMENDED FABRICS: Use a fabric that doesn’t fray such as cork, faux leather, kraft-tex, or leather.
Sallie Tomato Lucky Penny Wallet – Paper Pattern
The Lucky Penny Wallet is a simple, slim wallet that has been designed for sewing with cork fabric, vinyl, or kraft-tex. It only requires a small amount of material. This is a wonderful pattern for anyone who is sewing with cork, vinyl, or kraft-tex for the first time, or for using up scraps!
I’ve also included SVG cutting files if you prefer to cut the pieces with a digital cutting machine! Awesome, right?! From start to finish, this sewing pattern takes approximately 30-60 minutes complete.
FEATURES: six card slots, one ID pocket, money pocket, area for cell phone or checkbook, and strap closure
FINISHED SIZE: 7-1/2″ wide and 4″ high
RECOMMENDED FABRICS: Use a fabric that doesn’t fray such as cork, vinyl, kraft-tex, or leather.
Sew Many Creations- Diva Frame Wallet – Paper Pattern
The Diva is very easy to make. You’ll want one to match every bag you have! And just wait until your friends see it – they’ll want one too.
Inside each Diva Frame wallet is a zippered coin pocket, 2 open pockets for cash & receipts and 6 individual card pockets. The metal frame closure is the perfect finishing touch – With just 8 small screws, adding it is a snap!
Sew Many Creations- Ginger Cork Wallet – Paper Pattern
The Ginger Cork wallet is a simple, quick sew and uses no fabric, zippers or hardware!
One 9″ x 12″ piece of cork is all you need!
Finished Size: 4.25″ x 3.5″
Sew Many Creations- Mini Divas – Paper Pattern
Mini Divas are here! The perfect little accessory for your purse. Pattern includes instructions for BOTH the Mini Diva & the Mini Prima Diva. Wallets use the Mini Diva 4.5″ frame available in Silver & Gunmetal & Antique Brass.
Sew Many Creations- Prima Diva – Paper Pattern
Is it a wallet? Is it a wristlet? Is it a purse? It’s all of those! This versatile organizer wallet can be made with an optional wrist strap or chain loops. Inside you’ll find lots of card pockets – 12 card pockets, 3 open pockets, 2 zippered pockets and plenty of room for your cash and phone too!
The Prima Diva uses the same 7 1/2″ frame as the Diva Wallet.
Note: When printing a PDF with templates, be sure to choose “Actual Size” under size options.
Finished size: 7 1/2″W x 4 1/2″H x 2 1/2″D
Sewgnar – BiFold Wallet – Paper Pattern
Straightforward design with 6 card slots that fit multiple cards, two under card “hidden pocket” areas, and one cash slot. For use with self healing textiles only – cork, vinyl, leather, etc! This pattern WILL NOT work for fabric.
Use my original pattern to recreate a BiFold Wallet of your own! This easy-to-follow pattern walks you through each step, from printing to finishing your wallet. This simple instructional 3 page pattern includes two pattern pieces, or you can use my handy cutting guide if you’d rather conserve trees and not print anything.Once completed, you will have your very own unique BiFold Wallet, great for gifting or small business personal selling.
MATERIALS NEEDED
Fat Quarter of Cork, Vinyl, or Leather (or any other self healing material)
Coordinating Thread
Clips
Sewgnar – Gallivanter Passport Wallet – Paper Pattern
A slim yet roomy universal fit passport wallet with 4 recessed card slots, 2 passport areas, 1 slip pocket, 1 cash slot, and a zipper coin pouch.
Finished Dimensions:
9.25″ x 5.75″ (23.5cm x 14.75cm)
MATERIALS NEEDED
- Fat Quarter Cork, Thin Leather, or Vinyl
- (1) 14mm magnetic snap set
- 16” (40.5cm) of Ribbon or Landscape Fabric for card slots
- Clear Ruler
- Quick dry fabric glue OR ¼” (6mm) double sided tape (DST)
- Coordinating thread
- Clips (Wonder Clips, alligator clips, etc.)
Optional- (1) 6” (15cm) zipper or longer (will cut to size)
- Scrap piece of medium weight interfacing for magnetic snap
Skill Level: Confident Beginner looking to learn new techniques!